The Trusted Source
®
12
Your QuadraTop Premium is made of
the finest materials available but to keep
it looking new and for the maximum
possible wear, it will need periodic
cleaning and basic maintenance. The
main threats to your soft top are pollu-
tants, dirt and grime. By keeping your
soft top clean you will prolong the life of
your top. We recommend the following
to keep your top like new:
Washing: The soft top fabric should be
washed often using a mild soap, warm
water and a soft bristle brush (do not
use the brush on the window glass!).
You can also use special soft top clean-
ers available on our website and shown
on page 11. Make sure that after clean-
ing you rinse with clear water to remove
all traces of soap.
Zippers: Keeping the zipper cleaned and
lubricated with a silicone lubricant (see
Page 11) will help prevent damage and
keep the zippers in a smooth working
condition. If zipper opens behind the
slider, the slider may have been spread
apart. This problem can usually be fixed
by using an ordinary pair of pliers to
bring the sides back into parallel.Return
slider to the end of the zipper in the
normal Open position. Squeeze lightly at
first and test zipper. If the zipper contin-
ues to remain open squeeze more firmly
with pliers and try the zipper again.
Repeat procedure until your zipper
operates correctly.
Windows: It is very important that you
keep your QuadraTop Premium
windows clean! Use a mild soap and
water solution to gently clean your
windows. NEVER wipe your windows
clean with a dry cloth! Dust and dirt on
a dry cloth can scratch your windows
causing “fogging” and permanent
damage. When removing your windows,
store them with a towel between the
panels/rear windows to protect them
from damage. If frost or ice forms on the
outside of your windows during the
winter, DO NOT use an ice scraper to
remove this frost. Over time you will see
small micro scratches in your windows
which are natural wear and tear. These
Micro scratches can be “polished” out
using the window polish listed on page
11 (Available at Quadratec.com).
Water/Fabric: In the event of seeping
through the seams, 3M Scotchgard
®
may be applied on the inside of the
seams to stop the see . Rips in the fabric
may be repaired with Bondex
®
iron on
patches. Iron the patches to the Inside
of the top, carefully following the
Bondex
®
instructions.
Snaps: Keep snaps cleaned and lubri-
cated with silicone to help prevent
snaps from sticking to the studs. If a
snap does become stuck to a stud, use a
screwdriver and GENTLY pry apart to
prevent permanent damage to the snap
or the top fabric.
Care and Maintenance:
JK_2DR_07-09_12999_0218_A4_Layout 1 10/30/13 4:11 PM Page 12
10302013161402
