The Trusted Source
®
6
Step One:
Soft Top Installation
INSTALL TOP FABRIC
Raise the bow assembly and lock the
header to the windshield. As seen in
Figure G, Drape the top fabric, backing
side up, over the hood & windshield.
Figure H: Slide the extrusion along front
edge of the top into the channel in the
lower header. Line up center notch in
the fabric with center notch in the
header. Use masking tape to help hold
fabric in place along the lower header.
INSTALL TOP FABRIC
Close the upper header over the fabric,
sandwiching the fabric, but leaving it
facing up on the hood. Reinstall four (4)
corner screws. Then install the nineteen
(19) screws across the header. Lower the
bow assembly to the rear of the vehicle.
Close the
upper header
over the fabric
Step Two:
Soft Top Installation
INSTALL CORNER SCREWS
Wrap the fabric around the header
and raise the header slightly to work
the pockets in the fabric over the cor-
ners of header. Figure J: Install screws
removed in disassembly in each corner
to secure the fabric to the header. Fold
top over towards rear of vehicle.
Step Three:
Soft Top Installation
Figure G
Backing
side up
Figure H
Figure J
Center Notch
Install 19 screws
across header
Reinstall 4
Corner
Screws
Reinstall
Screws
QuadraTop Premium fabric is thicker and heavier than normal soft top
fabric. For ease of installation it must be warm before attempting
to install over your hardware.
JK_2DR_07-09_12999_0218_A4_Layout 1 10/30/13 4:11 PM Page 6
10302013161400
