The Trusted Source
®
10
Folding The Top Down:
REMOVE QUARTER PANELS
AND REAR WINDOW
To remove the rear Quarter Windows,
unzip the quarter window zippers.
Release the plastic strip from the re-
tainer. Release the Hook and Loop fas-
teners from around the Vertical Retainer.
To roll up the Rear Window, remove the
Tailgate Bar and open the zippers on
each side of the window to the top.
Start at the bottom and roll the window
to the inside. Avoid wrinkles in the fab-
ric and the window. Secure it in place
with the elastic garters inside of the top.
COLLAPSE TOP
With all windows
removed, release
the front of the
top from the wind-
shield. Raise the
front of the deck
and collapse the rear bows, tucking the
two plastic strips above the door open-
ings and the stay pad on the rear bow
inside of the bows, Wrap the fabric
around the bows, then tuck the rear
legs of the top under the bows.
Collapse bows &
fold toward rear.
Tuck plastic
strips and stay
pads inside
bows.
To remove
the Quarter
Windows,
unzip the
rear and top
zippers.
Wrap fabric around bows.
Before rolling up the rear window, make sure glass is clean.
Dirt and debris can cause scratches when rolled up.
Wrap rear legs
under bows.
WHEN OPERATING VEHICLE WITHOUT THE QUARTER WINDOWS,
THE REAR WINDOW SHOULD BE ROLLED UP AND SECURED WITH
THE ELASTIC GARTERS FOR PROPER VENTILATION.
JK_2DR_07-09_12999_0218_A4_Layout 1 10/30/13 4:11 PM Page 10
10302013161401
