The Trusted Source
®
6
On TJ vehicles: Snip off the fuse tap on
the end of the accessory wire on your
new lightbar. Route the wire under the
hood along the fender wall to the pas-
senger front corner of the vehicle.
Locate the wire loom behind headlight
bucket and extract the black wire with
yellow tracer stripe.
Install the supplied wire tap over the
black wire with yellow tracer stripe.
Install the cut end of the accessory
wire into the other slot in the wire
tap as shown. Using your pliers, gently
close and latch the cover wing of the
wire tap to complete the circuit. For
best weather resistance, wrap the wire
tap with black electrical tape.
(not shown)
Vehicle Specific Wiring: TJ Vehicles
WHEN ROUTING ELECTRICAL WIRES, ALWAYS AVOID PINCHING WIRES.
ALWAYS AVOID HOT OR MOVING COMPONENTS. ALWAYS SECURE WIRES
WITH CABLE TIES.
J5_BAR_INST.qxp_Layout 1 10/12/16 2:37 PM Page 6
10122016143920
