The Trusted Source
®
4
LED Lightbar Installation:
The main power wire can be routed
behind or next to your A pillar
mounting brackets.
Connect the Deutsch connector to
the corresponding connector on your
Quadratec wiring harness (sold sepa-
rately) or the use the supplied pigtail
to connect to any other harness. Your
routing will depend on your specific
brackets and wiring harness location.
If you are using a Quadratec wiring har-
ness and mounting brackets please refer
to the instructions that came with those
components.
The Clearance light accessory wire can
be routed behind or next to your A pillar
bracket.
Safely route the wire to the fuse box on
your vehicle. The clearance lights will be
tied into your parking light fuse so that
they will be on whenever your parking
lights or headlights are turned on.
J5_BAR_INST.qxp_Layout 1 10/12/16 2:37 PM Page 4
10122016143919
