On JK vehicles: The fuse box is located
under the hood on the right hand side of
the engine compartment. Locate fuse
panel lid and remove it.
Locate the 15 amp fuse in location M18.
Remove the 15 amp fuse and install it in
the lower slot of the light bar harness
fuse holder. The upper slot should have
a 5 amp fuse pre-installed in it.
Install the fuse holder back into the M18
fuse location in your fuse box. Route the
wire as show and replace the fuse lid.
Be careful not to pinch the wire.
The Trusted Source
®
5
Vehicle Specific Wiring: JK Vehicles
WHEN ROUTING ELECTRICAL WIRES, ALWAYS AVOID PINCHING WIRES.
ALWAYS AVOID HOT OR MOVING COMPONENTS. ALWAYS SECURE WIRES
WITH CABLE TIES.
J5_BAR_INST.qxp_Layout 1 10/12/16 2:37 PM Page 5
10122016143920
