background image

The Trusted Source

®

2

Before You Begin Installation: 

Congratulations on your purchase of the
Quadratec J5 LED Lightbar for your
Jeep

®

Wrangler.

When unpacking, check to make sure all
parts are included and not damaged due 

to shipping. If any part is missing or 
broken, please call Customer Service
at 800-745-6037 as soon as possible.

Thank you again for your purchase
and let’s start the installation process.

THE FULL WIDTH LIGHTBAR IS LONG AND SOMEWHAT AWKWARD TO
HANDLE DURING INSTALLATION. WE RECOMMEND GETTING ASSISTANCE
TO PREVENT DAMAGE TO THE PRODUCT OR YOUR VEHICLE. 

A hazardous situation which, if not avoided, could result in death or
serious injury. You CAN be KILLED or SERIOUSLY HURT if you don’t
follow instructions.

A hazardous situation which, if not avoided, could result in minor or
moderate injury. You CAN be moderately HURT and also may suffer
property damage if you don’t follow instructions. 

Careful attention is required to this instruction or operation but does
generally not relate to personal injury. Damage to your Quadratec

®

product or other property may result if you don’t follow instructions. 

Always wear Safety Glasses while
handling tools during installation. 

Installation instructions for the
Quadratec light bar mounts and wiring
harness are provided separately with
those components. If you are using
different brackets or harness, please
follow the manufacturer’s instructions.

Product Care and Maintenance:

A Few Words About Product Safety: 

Your LED Lightbar is designed to 
enhance the utility and enjoyment of
your off road capable vehicle. Before 
installation, please take a moment to 
review the following safety information 

and installation instructions. Important
safety information is generally preceded
by one of three signal words indicating
the relative risk of injury.  
The signal words mean:

J5_BAR_INST.qxp_Layout 1  10/12/16  2:37 PM  Page 2

10122016143918

Содержание J5 97109.1023









Отзывы: