Quadra-Fire Edge60 Скачать руководство пользователя

Страница: 28 / 64

Page 8

7051-158

April 9, 2009

EDGE 60 Pellet Fireplace

E. Finishing Material

It is important that the finishing material is determined before

the appliance is secured to the floor. Depending on the fin

ishing material and installation method, the appliance may

need to be positioned further in or out of the wall.

There are three ways finishing material can be applied:.
1. Behind the mounting frame

. Flush with the mounting frame

. Proud of the mounting frame

1. Behind the Mounting Frame

The mounting frame is designed to have a 1/ inch (1mm)

overlap on the sides and the top of the framing opening.

Figure 28.1.

NOTICE:

Non-combustible material is not needed to finish

this appliance.

Positioning the nailing flanges:
• Slide the nailing flanges all the way to the front and this

will set the appliance for 1/ inch (1mm) sheet rock.

• If tile, marble or other flat surface finish material is desi

ered and you want the mounting frame to cover the cut

edge, set the nailing flanges at a dimension of the sheet

rock thickness plus the finishing material thickness.

Figure 28.2.

Example: Sheetrock = 1/2 inch (13mm)

Finish Material = 3/8 inch (9.5mm)

Move flange: 7/8 inch (22mm)

2. Flush with the Mounting Fram

The finish material can not be thicker than 1-1/ inches

(8mm) to use this method.

Figure 28.3.

• Set the nailing flanges for sheet rock thickness and

install the appliance.

• Install the mounting frame.
• Install the finishing material to edge of the mounting

frame.

3. Proud of the Mounting Frame

This method is mainly used for a brick or stone installation.

When finishing material is proud of the mounting frame

and front, there must be a 1-1/4 inch (mm) airflow clear

ance in front of the mounting frame.

Figure 28.4.

Use the masonry spacer supplied with the Front to position

the finishing material at the proper dimension. Remember

to keep the Front opening clearances in mind when finishing

material is proud of the Front.

(See pages 29-30)

• Set the nailing flanges for sheet rock thickness and

install the appliance.

• Install the mounting frame.
• Install the finishing material to edge of the mounting

frame.

•

Complete the installation following all specified clear

ances to combustibles.

Figure 28.1.

Figure 28.2

Figure 28.3.

Figure 28.4.

Adjustable Nailing Flange

Adjustment Screw

Front of Fireplace

7/8 in

(22mm)

Mounting Frame

Finishing Material Behind

the Mounting Frame

Mounting Frame

Finishing Material Flush

with Mounting Frame

Door Frame

Finishing Material Proud of the Door Frame

Maintain 1-1/4 inch (32mm) air

clearance in front of door frame

Masonry Spacer

Содержание Edge60

































































Результаты поиска

Содержание Edge60

Отзывы:

Похожие инструкции для Edge60

Бренды по названию

Популярные бренды

Quadra-Fire Edge60, Руководство пользователя

Результаты поиска

Содержание Edge60

Отзывы:

Похожие инструкции для Edge60

Бренды по названию

Популярные бренды