Quadra-Fire Edge60 страница 11 Скачать руководство пользователя

Страница: 11 / 64

April 9, 2009

7051-158

Page 11

EDGE 60 Pellet Fireplace

2. Soft Start Cycle (SS-Low / SS-Med)

Once the fire is lit:

• T

he appliance moves into the low soft-start cycle as it

continues to build the fire

• M

ore fuel will be added

• As the fire builds, the appliance will change to medium

soft-start mode

• The heating cycle begins

3. Heating Cycle ( Auto / Man - L, ML, M, MH, H)

There are two choices in the Automatic / Manual menu of

how your appliance will operate:

Automatic Mode

• T

he wall control will turn the heat output level up or down

depending on how far the room temperature is from the

desired temperature

•

The digital display will read AUTO:M, i.e. automatic-me

dium level

• As the room temperature approaches the desired tem

perature, the appliance will turn down to lower settings

• When the home reaches your set temperature, the appli

ance will go into the shutdown cycle

Manual Mode

• Set the heat output setting from the main screen.

•

The right bottom button will read HEAT OUTPUT

• You can operate the appliance from any of the 5 levels
• On the lowest level (MAN: L) the appliance will stay on

longer, burn less fuel per hour, and will take longer to

bring the home up to your desired temperature

• On the highest setting (MAN:H) the appliance will burn

more fuel per hour, and bring your home up to tempera

ture more quickly

•

In Manual mode the heat output does not change but

will stay at the setting you chose until the comfort level

is reached (meaning the thermostat has been satisfied).

Turn to OFF to stop operation.

4. Shutdown Cycle

Once your home has reached your set temperature:

• A

ppliance will stop feeding fuel and allow the fire to dimin

ish

•

Convection blower will continue to run until the appliance

cools to appropriate temperature

• Appliance will begin the auto-clean cycle

5. Auto-Clean Cycle

The firepot auto-clean system will cycle:

• W

hen the appliance is first plugged in

• W

hen the house reaches temperature and the appliance

shuts down

• At prescribed intervals, depending on the type of fuel se

lected

• When starting up after an electrical interruption
If your appliance is running and the auto-clean cycle is initi

ated, the appliance will revert to shutdown cycle.

•

The floor of the firepot will open and dump the ash into

the ash pan

•

It takes approximately minutes to complete the auto-

clean cycle

• The floor will then shut, and if the thermostat is still call

ing for heat, the fire will start again

• During this auto-clean cycle, the convection blower may

continue to run. The combustion blower will continue to

run.

Additional Screen Messages:

READY

It is telling you that the home is up to temperature

and doesn’t need any heat.

- - - - -

The screen will show 5 dashes when the wall

control and the control board are NOT communicating with

each other. Check that the wiring on the thermostat is prop

erly connected.

MAINTENANCE BURN

This indicates the appliance is

operating on battery backup, prior to the auto-clean. The

maintenance burn will keep the system from shutting down

as the appliance will not automatically re-light in battery

back-upl mode.

OFF

The AUTO/MANUAL SETTING screen has been set

to OFF. Set the appliance to OFF when performing periodic

maintenance to prevent an unexpected startup.

Содержание Edge60

































































Результаты поиска

Содержание Edge60

Отзывы:

Похожие инструкции для Edge60

Бренды по названию

Популярные бренды

Quadra-Fire Edge60, Руководство пользователя

Результаты поиска

Содержание Edge60

Отзывы:

Похожие инструкции для Edge60

Бренды по названию

Популярные бренды