August
1,
2018
7014-285C
21
CB1200 Pellet Insert
2 screws into
back of hopper
1 screw down
into filler piece
Figure 21.1
Figure 21.2
Figure 21.3
Figure 21.4
6 screws to attach
rear panel
8 screws to attach
left shroud panel
Figure 21.5
Figure 21.6
3 screws to attach right shroud
panel to right shroud corner piece
5 screws to attach
right shroud panel
Drill these 2
holes
Figure 21.8
Figure 21.7
Drill these 3
holes
4. Install the left shroud panel corner; 2 screws into back
of hopper and 1 screw down into the filler piece
(Figure
21.1)
.
5. Install the Rear Panel using six screws
(Figure 21.2)
.
6. Install the cover plate over the top vent opening using 4
screws
(Figure 21.3)
.
7. Attach the left shroud panel using eight screws
(Figure
21.4)
.
8. Assemble the right shroud panel corner and the right
shroud panel using 3 screws
(Figure 21.5)
.
9. Attach the right panel assembly using 4 screws to
appliance
(Figure 21.6)
.
10. Using the electric drill with #26 drill; bit drill 3 holes
into the hopper. Add three screws to secure shroud
assembly to the appliance
(Figure 21.7)
.
11. Using the electric drill with #26 drill; bit drill 2 holes
into the back of the hopper. Add two screws to secure
shroud assembly to the appliance
(Figure 21.8)
.
