47
DS-1200 G4i Operator Manual Issue 4 - Nov 2020
8.2 Loading the Feeder hoppers
Feeders are used for inserts up to a maximum depth of 6” (152mm).
To load the hopper, rotate the adjustment knob to set the side guides slightly wider
than the insert - allow about 1mm each side).
Slide the backstop rearwards and load the inserts on the track. At the front of the
track, raise the centre guide and use the backstop to push the stack of inserts
forwards, so that the front ones follow the slope of the track and make contact
with the ribbed rollers at the front. Do not push the backstop in too tightly - it will
automatically adjust to the correct tension when the machine starts operating.
1. Backstop
2. Ensure inserts are correctly orientated so they enter the envelope the right way.
3. Side guide adjustment knob
