Quaddrix QT-220EX, Руководство пользователя

Страница: 28 / 69

28
3. Install Suspender.
Put the cables through the cavity of the
suspender and then turn the thread pipe
head into the bracket base and fasten the
connection with an M4 screw.
NOTE:
Apply water-proof tape to the thread
and put silica gel to the suspender as shown
in the picture when installing an outdoor
dome.
4. Unfasten the circuit board.
Unscrew the screw to open the circuit board
on connection base.
5. Install Housing.
Put cables through the top hole of the housing,
and then turn the housing thread pipe head into
suspender and fasten the connection with two
M4 screws.
If installation height is not high enough, mount
housing directly onto the base.
Apply water-proof tape to the housing thread.
NOTE: Apply silica gel to the gap between
bracket and the ceiling in the case of outdoor
dome.