Quaddrix QT-220EX, Руководство пользователя

Страница: 19 / 69

19
3. Unfasten the circuit board.
Unscrew the screw to open the circuit board on
the connection base.
4. Install Housing.
Insert cables into the housing through the
top hole.
Then, turn the housing thread pipe head into
the wall bracket and fasten the connection
with a M4 screw.
Apply water-proof tape to the housing
thread.
NOTE:
Apply silica gel to the gap between
bracket and wall in the case of outdoor
dome.
5. Connect Cables.
Plug the cables into the
corresponding sockets on the circuit
board.
When finished, tighten the circuit
board back and turn On the power.
The red LED will light. Turn Off the
power after checking.
NOTE: Please make sure power is
off before doing connections.