Quaddrix QT-220EX, Руководство пользователя

Страница: 20 / 69

20
6. Set Dome ID, Baud Rate and
Protocol.
Set dome ID, bard rate and protocol via
DIP switches (Refer to APPENDIX I).
Take the sponges off.
7. Down cover preliminary
installation.
Attach the safety chain with a
M3 nut as picture shows.
The safety chain prevents the
down cover from dropping
down.
NOTE:
Connect the heater plug
into the socket in the case of
outdoor dome.
8. Install black liner and Pan/Tilt
Module.
Install the pan/tilt module with two
clips, red to red, black to black and
match the holes in pan/tilt module and
the guild poles.
Gently push the module upward until
you hear two “click” sounds. Finally,
check if it is tightly installed. Push the
black liner into the two tabs.
NOTE:
Do not forget to take off the
lens cover.