Quaddrix QT-220EX, Руководство пользователя

Страница: 23 / 69

23
8. Down Cover Preliminary Installation.
Attach the safety chain with a M3 screw as
seen on the picture.
The safety chain prevents the down cover
from dropping down.
NOTE
: Connect the heater plug into the
socket in the case of outdoor dome.
9. Install black liner and Pan/Tilt
Module.
Install the pan/tilt module with two clips,
red to red, black to black and match the
holes in pan/tilt module and the guild poles.
Gently push the module upward until you
hear two “click” sounds.
Finally, check if it is tightly installed.
Push the black liner into the two tabs.
NOTE: Do not forget to take off the lens
cover.
10. Install Down Cover.
Unscrew the two M4 screw on down cover ring
Push up the down cover into the housing and
then fasten down cover with two M4 screws.
NOTE:
Apply lubricant to the O-ring to make
down cover easier to slip in.