manualshive.com logo in svg

Quadbeam Technologies MXD70 Series, Руководство по установке и эксплуатации

Поделиться
Скачать
Quadbeam Technologies MXD70 Series Скачать руководство пользователя страница 35

 
 

 

 

 
 
 
 
 
 
 
 

 

 

 

 

Faults 

 

 

 

MXD70 Suspended Solids / Turbidity
Setup and Operating Guide 

 

- 33 - 

 

 

 

 

 

Faults

Appendix C – Error Messages 

Internal Error Messages 

 

E001 

UNIT 

Processor RAM Read/Write Error

 

Try switching the unit off and then on again.  If the message persists, consult with 
your supplier, as this unit may require to be returned for repair. 

 

E002 

UNIT 

External RAM Read/Write Error

 

Try switching the unit off and then on again.  If the message persists, consult with 
your supplier, as this unit may require to be returned for repair. 

 

E003 

UNIT 

Internal Setup Checksum Error

 

The instrument configuration has for some reason become corrupted. Try 
switching the unit off and then on again. If the message persists, Reset Whole unit 
from the Reset Unit Settings option in the Save/Restore menu or consult with your 
supplier, as this unit may require a repair. 

 

E004 

UNIT 

Output Card Setup Checksum Error

 

Try switching the unit off and then on again.  If the message persists, consult with 
your supplier, as this unit may require to be returned for repair. 

 

E005 

UNIT 

Internal Outputs Setup Checksum Error

 

Try switching the unit off and then on again.  If the message persists, consult with 
your supplier, as this unit may require to be returned for repair. 

 

E006 

UNIT 

For Future Use

 

E007 

UNIT 

Unit Setup Checksum Error

 

The instrument configuration has for some reason become corrupted. Try 
switching the unit off and then on again. If the message persists Reset the whole 
unit from the Load Default Settings option in the Save/Restore menu or consult 
with your supplier, as this unit may require a repair. 

 

E008 

UNIT 

Unit Store A Checksum Error

 

The data in Unit Store A has been corrupted.  Save the current setup back to Unit 
Store A in the Save/Restore menu. 

 

E009 

UNIT 

Unit Store B Checksum Error

 

The data in Unit Store B has been corrupted.  Save the current setup back to Unit 
Store B in the Save/Restore menu. 

 

E010 
to 
E013 

UNIT Maths 

Error

 

There has been an internal maths calculation failure. As such, it should not appear if 
the software is functioning properly.  The error message should clear after approx. 
5 seconds.  If the error continues to be displayed consult with your supplier, as this 
unit may require to be returned for repair. 

 

E014 

UNIT 

Contrast Chip Error

 

The Contrast Chip is not operating correctly. Try switching the unit off and then on 
again.  If the message persists, consult with your supplier, as this unit may require 
to be returned for repair. 

 

E015 

UNIT 

Unit SD Card Checksum Error

 

The SD Card store from which the entire unit was restored from has become 
corrupted. Check the unit's settings and then save the settings again to the SD card 
store. 

 

E016 

UNIT 

SD CARD FULL

 

The SD card has become full. To continue use, either replace with a blank SD card 
or remove existing files from SD card 

 

Содержание MXD70 Series





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды