To COPY a pattern, hold the corresponding encoder (1-8 from top to bottom) and click the
destination encoder (1-8 from top to bottom).
Unlike the LOAD and SAVE functions, the COPY functions will work regardless of the cur-
rently selected pattern. This is intended to speed up composition and performance.
Div/Mult
The Division/Multiplication in relation to the Clock rate can be selected by holding shift, and
rotating the encoder.
Divisions and Multiplications are in the following order:
• Divide by 8
• Divide by 4
• Divide by 3
• Divide by 2
• Clock Rate
• Multiply by 2
• Multiply by 3
• Multiply by 4
• Multiply by 8
Each is represented by one of the eight LEDs in between the encoders. When no division
or multiplication are selected the two central LEDs will be illuminated.
Slew
Holding shift, and clicking the encoder will enter the per-step Slew editor.
When an encoder is touched, the eight LEDs in between the encoders will indicate the
amount of slew, if any, currently set.
Once a step has been touched, further rotations will increase/decrease the amount of slew
to the next step.
To move forward a page, press reset.
To loop the page that is being edited press channel.
While looping a page within Tune Modes the Channel LED will pulse between the channels’
color and white.
16
