To exit the Per-Step slew editor, hold shift, and click the Slew encoder.
To adjust all steps’ slew at once, hold shift and rotate the Slew encoder while the sequencer
is running.
The LEDs will indicate the amount of slew from the top down.
Ratchets
Ratchets define the number of clocks that the sequence will remain on the selected step.
The default number of ratchets is one, meaning for each clock pulse, the sequence will
advance one step.
For example, setting step four’s Ratchets to eight, will cause that step to be repeated for 8
clock pulses before advancing to the next step.
Holding shift, and clicking the encoder will enter the per-step Ratchet editor.
When an encoder is touched, the eight LEDs in the encoders will indicate the number of
ratchets, currently set.
Once a step has been touched, further rotations will increase/decrease the amount of slew
to the next step.
To move forward a page, press reset.
To loop the page that is being edited press channel.
While looping a page within Tune Modes the Channel LED will pulse between the channels’
color and white.
To exit the Per-Step ratchet editor, hold shift, and click the Ratchet encoder.
To adjust all steps’ ratchets at once, hold shift and rotate the Ratchet encoder while the
sequencer is running.
Notes
Holding shift, and clicking the encoder will enter the per-step Note editor.
When an encoder is touched, the output will update to the voltage for that step.
Once a step has been touched, further rotations will increase/decrease the voltage of that
step according to the currently selected scale.
17
