-5V to +5V CV input added to knob position.
CV only changes the currently selected channel.
5. Clock In
Clock input to module.
When the Rate knob is all the way down, this jack is enabled, and the internal clock will be
shut down.
6. Rate
Controls the rate of the internal clock.
Current range of clock rate is 5 seconds to 10 milliseconds (100Hz)
With Multiplications and Divisions active this can be as slow as 40 seconds per step to
1.25ms (800 Hz)
When Rate knob is all the way down, the internal clock is shut down, and the Clock In jack
becomes active.
7. Reset
Reset input.
Pressing the button will reset both channels’ sequences to their first step on the next clock.
A trigger to the Reset gate input will reset both channels’ sequences to their first step on
the next clock.
Holding Shift and Pressing Reset will reset the currently selected channel’s sequence to
its last edited state, undoing any mutation that may have happened since it was manually
adjusted. This also regenerates the tree of subsequences.
8. Channel
Pressing the Channel button toggles between channel 1 and channel 2
When the LED is Blue channel 1 is selected.
When the LED is Green channel 2 is selected.
12
