USER MANUAL
17
CONTROL & FUNCTION
z
Regular breaks during operation are essential to maximize the life of this
device as it is not designed for continual use.
z
Do not switch the unit on and off in short time intervals
z
Always unplug the unit when it is not used for a longer time. Or before
replacing the bulb or start servicing.
z
In the event of serious operation problems, stop using the fixture and contact
your dealer immediately.
Attention Laser will be output from laser aperture in 5 seconds after
the unit is powered on.
Operating Mode
Attention Once after every power on laser, the VERSION and
MANUFACTURE INFORMATION will be shown in LCD
monitor of rear panel.
When laser is powered on, LCD monitor on rear panel shows the current
operating standalone mode or DMX address of DMX mode. With help of LCD
control panel, is very easy to set and change the operating mode of laser. After
every resetting and saved, the new mode information will be shown on LCD
monitor at next power on.
Mode Option, to choose the operating mode of laser.
Confirmation, to confirm the laser to show the present mode at the
next operation.
UP/DOWN, to change operating mode, parameter or DMX address.
