background image

Laser Show System 

 

3

 

z

 

Check that the available voltage is not higher than the one stated on the rear 

panel of the unit. 

z

 

The power cord should always be in perfect condition: switch the unit 

immediately off when the power cord is squashed or damaged. 

z

 

Never let the power-cord come into contact with other cables. 

z

 

This fixture must be earthed to in order comply with safety regulations. 

z

 

Don’t connect the unit to any dimmer pack. 

z

 

Always use an appropriate and certified safety cable when installing the unit. 

z

 

In order to prevent electric shock, do not open the cover, Apart from the lamp 

and mains fuse there are no user serviceable parts inside. 

z

 

Never

 repair a fuse or bypass the fuse holder. 

Always

 replace a damaged fuse 

with a fuse of the same type and electrical specifications! 

z

 

In the event of serious operating problems. stop using the fixture and contact 

your dealer immediately 

z

 

The housing and the lenses must be replaced if they are visibly damaged. 

z

 

Please use the original packing when the device is to be transported. 

z

 

Due to safety reasons it is prohibited to make unauthorized modifications to the 

unit. 

 

4. LASER SAFETY INSTRUCTIONS: 

z

 

According to the EN 60825-1

1994 + A2

2002 regulations, this laser fall under 

the classification 3B.Direct eye exposure can be dangerous. 

 

 

 

 

 

z

 

This is so-called show laser, emitting radiation with a wavelength spectrum 

between 400 and 700nm and producing lighting effects for shows. 

z

 

Due to the instruction of this laser, the beam is moved so fast, that it can only hit 

the eye very short. This is why the use of this laser for a laser-light show can be 

regarded as save. 

z

 

Never direct the laser beam to people or animals and never leave this device 

running unattended. 

Important: Never look directly into the light source! Don’t use the effect 

in the presence of persons suffering from epilepsy. 

Содержание Galaxy 152.737

















Отзывы: