Laser Show System
8
4. INTERLOCK input:
used to connect the optional
emergency stop switch(see picture). When you push
this switch the laser beam will disappear immediately.
IMPORTANT! For your own safety we strongly
recommend to connect this optional switch!
5. DMX INPUT:
3pin male XLR- connector used to connect universal
DMX-cables. This input receives instructions from a DMX-controller.
6. DMX OUTPUT:
3pin female XLR-connector used to connect the space color
laser with the next unit in the DMX chain.
7
．
CONTROL PANEL:
To set the operating mode or DMX address.
8. DISPLAY:
Information display, to show the laser operating information.
9.SAFETY EYE:
used to attach a safety cable when the unit is rigged (see
paragraph “overhead rigging”)
10. MUSIC INPUT SENSITIVITY:
This potentiometer is used to adjust the music
input sensitivity. Turn the potentiometer until the laser works in sync with the
music.
11. INTERNAL MICROPHONE:
the built- in microphone is used to synchronize
the laser show to the beast of the music
6.2 Front panel of the fixture
Содержание Galaxy 152.737
Страница 1: ...152 737 Version 2 0...
