Laser Show System
7
Building a master/slave-chain:
Connect the DMX-output of the master fixture in the data-chain with the
DMX-input of the first slave, Always connect output with the input of the next slave
until all slaves are connected.
Caution:
It’s necessary to insert the XLR termination plug (with 120Ohm) into the
input of the master fixture and into the output of the last slave fixture in the link in
order to ensure proper transmission on the data link.
6. DESCRIPTION:
6.1 Back panel of the fixture
1. POWER Switch:
Switch on and off the power
2. MAINS INPUT:
with IEC socket and integrated fuse holder, connect the
supplied mains cable here.
3. ON/OFF KEY ACTIVATE SWITCH:
used to switch the unit on/off. Use the keys
to make sure only a skilled operator is able to switch the laser on.
Содержание Galaxy 152.737
Страница 1: ...152 737 Version 2 0...