QTech 1U, Руководство по установке оборудования

Страница: 91 / 221

Hardware installation manual
Qtech Platform 2U Server Product Technical Manual 87
www.qtech.ru
4.6.1.
Intel® Rapid Storage Technology Enterprise SATA Option ROM
Utility setup program
Intel
®
The Rapid Storage Technology Enterprise SATA Option ROM utility program can
create RAID0, RAID1, RAID5, RAID10 through the SATA hard disk connected to the South
Bridge chip built-in on the motherboard.
1. After completing the settings in the BIOS, reboot and see the following prompt:
/ If the operating modes of the sSATA and SATA controllers are all set to RAID, the prompt “Press
<CTRL-I> to enter Configuration Utility” will appear twice during the BIOS boot process. This
corresponds to the sSATA and SATA controllers, depending on the configuration. The disk
selection controller required for RAID.
4.
Go to the RSTe configuration page shown in Figure 1-15. For the interface description, see
Table 3-3. Please refer to the key operation prompts of the bottom border of the interface
to navigate and modify settings in the interface.
Figure 1-15 RSTe configuration interface