Page | 7
TRANSPORTING YOUR QTAC
Gross Vehicle Weight Rating
•
Ensure that the gross vehicle weight rating (GVWR) of the QTAC carrying vehicle is
sufficient to support your QTAC unit with a full tank of water, plus any equipment,
fluids and personnel that you may wish to carry. Alternatively, you can reduce the
volume of water in your QTAC to maintain a GVWR under the limit of your vehicle.
General QTAC Mounting and Fastening
Figure 4 – Mounting Options
Ensure that your QTAC unit is secured to the carrying vehicle. Two main mounting
methods are available for your QTAC unit:
1. The preferred method of securing the QTAC to the bed of the vehicle is to mount
the QTAC at the forklift runner slots (
Figure 4)
located at the bottom of the water
tank on each side. The flanges have been machined to accept a variety of
mounting hardware options. Mounting hole locations are 43 7/8” across x 31 front
to rear.
