QSSC -680 series, Руководство пользователя

Страница: 60 / 98

Chapter 4 — Using the Web UI
51
Chapter 4
U
U
s
s
i
i
n
n
g
g
t
t
h
h
e
e
W
W
e
e
b
b
U
U
I
I
The AST2000 firmware features an embedded web server, enabling users to connect to the AST2000 using an
Internet browser (Microsoft Internet Explorer) without needing to install KVM and Virtual Storage software on
the remote console side PC.
The following web browsers are supported:
•
Internet Explorer 6 and 7
•
Mozilla 1.7.13 or later
•
Firefox 1.5 or later
Note:
If BMC F/W recovery is required, short jumpers J1C2 and J2A1enabling the MB to
boot directly.
Setting the KVM TCP Port on Network
The AST2000 web user interface requires access to the system’s TCP ports. Before using the web user interface,
ensure that the firewall settings are configured to allow access to the following ports: 8890 (KVM), 9000 (Stor-
age), 9001, 9002, and 9003.
Note:
For information on configuring firewall settings to allow TCP port access, refer to
your firewall software user’s guide.
Logging into the Web User Interface
Users must enter the AST2000 embedded server IP address or URL into the address bar of the web browser or
connect using OEM customer’s Embedded Server Management (ESM). The default IP address is
https://192.168.1.87
When connecting to the AST2000 using a web browser, SSL is automatically activated and the display user login
form is displayed prompting for the username and password. This authentication with SSL protection prevents
unauthorized intruders such as hackers from gaining access to the AST2000 web server. If authentication is
passed, the user can manage the server by privilege. At the same time, the PHP (PHP Hypertext Preprocessor) re-
cords all user information, including user ID and privilege.
The following figure displays the user authentication web page.
The default username is root . The default password is changeme .