Qsonica Sonicator Q700, Руководство по эксплуатации

Страница: 14 / 30

Rev. 6-12
14
6. Preparation for Use
INSPECTION
Prior to installing the ultrasonic processor, perform a visual inspection to detect any
evidence of damage, w hich might have occurred during shipment. Before disposing of any
packaging material, check it carefully for small items.
The ultrasonic processor w as carefully packed and thoroughly inspect ed before leaving our
factory. The carrier, upon acceptance of t he shipment , assumed responsibility for its safe
delivery. Claims f or loss or damage sustained in transit must be submitted to the carrier.
If damage has occurred, contact your carrier w ithin 48 hours of the delivery date. DO NOT
OPERATE DAMAGED EQUIPMENT. Retain all packing materials for future shipment.
ELECTRICAL REQUIREMENTS
The ultrasonic processor requires a fused, single phase 3 -terminal grounding type
electrical outlet. For pow er requirements, check the label on the back of the unit.
INSTALLING THE ULTRASONIC PROCESSOR
The ultrasonic processor should be installed in an area that is free from excessive dust,
dirt, explosive and corrosive fumes, and extremes of temperature and humidity. If
processing flammable liquids, use an approved fume hood and do not place the pow er
supply in the fume hood.
When positioning the unit, be sure to leave adequate space behind the unit so that all
connections can be easily disconnected.
WARNING
For your personal safety, do not, under any
circumstances, defeat the grounding feature of the
power cord by removing the grounding prong.