6
EN
Specifications
AD-CI52T
AD-CI52ST
Frequency Response
1
:
85- 20k Hz (-6 dB), 65- 20k Hz (-10 dB)
63- 20k Hz (-6 dB), 53- 20k Hz (-10 dB)
Maximum Output
2
:
102 dB SPL continuous rms output
103.5 dB SPL continuous rms output
(calculated)
108 dB SPL peak output
109.5 dB SPL peak output
Transducers:
LF: 133 mm (5.25”), 25 mm (1”) voice coil;
LF: 133 mm (5.25”), 25mm (1”) voice coil;
weatherproof, low-distortion fiberglass cone.
weatherproof, low-distortion fiberglass cone.
HF: 25mm (1”) titanium dome, neodymium
HF: 25mm (1”) titanium dome, neodymium
magnet.
magnet.
Nominal Coverage:
90° conical (average 1 kHz - 4 kHz)
100° conical (average 1 kHz - 4 kHz)
Impedance (ohms):
8.0 nom./ 6.4 min. @ 15 kHz.
8.0 nom./ 6.0 min. @ 13 kHz.
Power Rating
3
:
rms (IEC 100 hrs):
40 watts rms (30 watts, AD-C52T)
40 watts rms (30 watts, AD-C52ST)
recommended amp power:
80 watts rms, maximum
80 watts rms, maximum
Sensitivity:
86.0 dB, 1 watt, 1 meter, flush mounted (2 pi)
87.5 dB, 1 watt, 1 meter, flush mounted (2 pi)
Bass Loading:
sealed
ported, tuned to 75 Hz.
Optional Processing:
65 to 125 Hz. high pass >12 dB/octave
55 to 125 Hz. high pass >12 dB/octave
Dimensions:
see drawings
see drawings
Net Weight:
AD-CI52T: 3.4 kg (7.5 lb.)
AD-CI52ST: 3.9 kg (8.5 lb.)
Enclosure:
Corrosion-resistant plated steel enclosure with injection-molded plastic baffle. Press on metal grill.
Mounting System:
Captive, integral mounting clamps. Insert enclosure into cutout, and tighten. Suspended ceiling C-ring
and support bars included.
Connectors:
Terminal block connector inputs and terminal block “through” connectors (rated for 400W max).
Controls:
Transformer “tap” selector/ bypass (8 ohm) switch, settings: 3.75, 7.5, 15, and 30 watts (7.5, 15, 30 watts
for 100V) and 8 ohms. 70/100V Insertion loss: 0.8 dB, Averaged over 50Hz - 20kHz bandwidth (30W tap).
Transformer Distortion: less than .01% THD above 100Hz, 0.2% @ 50Hz (30W tap). Bandwidth: 40 - 20k
Hz (-1dB, all taps).
Agency Listings:
CE, UL 1480 (commercial/professional use, outdoor damp), UL 2043 (air handling spaces).
Specification Notes:
1- All frequency ranges specified refer to measured half-space response (2 pi).
2- Calculated maximum peak SPL at 1 m, half-space, speaker operating at rated rms power pink noise input, 50 Hz to 20 kHz.
3- Maximum input power tested in accordance with IEC recommendations; 50 Hz to 20 kHz band limiting, 6 dB signal crest factor.
Specifications are subject to change without notice.
For detailed information, visit QSC’s web site at http://www.qscaudio.com or call us at 1-800-854-4079 (toll-free USA only)
