QRS PNOscan II, Руководство по установке

Страница: 3 / 32

Table Of Contents
Accessories
QRS Part # Description Purpose
50126 USB A Male - 5 Pin Mini B Connects PNOscan II to a computers’ USB port
70153 20’ MIDI Cable [10’ = 70152] Connects PNOscan II MIDI Out to a MIDI device
79208 Sostenuto - A Sost Pedal Circuit board can be ordered and connected to the “Sost” connector on the Soft Pedal
Sensor board to monitor the Sostenuto pedal on the piano. Order: 1-79208; 1-7921734; 1-1790185; 1-7921736; 1-
7921770; 2-70585
Unless your using a QRS Ancho or Petine controller with PNOscan II, one of these two cables is required to use PNOscan.
Upright Conversion Kit
QRS Part # Description
79217UC Parts added to this kit for installation into an Upright piano.
3
Precautions! 2
Welcome
4
Brief Description
Tools And Materials List 5
Parts List 6
Parts Description 7
Installation Procedures
8 A ] Preparation
B ] Locating the Front to Back Position of the Optical Key Scan Sensors
C ]
Key Scan - Track and Circuit Board Assembly
9
Locking Verses Non-Locking Cable Connectors
D ] Connecting the Four Key Scan Circuit Boards 10
E ] Establishing the Bass/Treble Position of the Key Scan Circuit Boards - Function Test 11-13
F ] Locating and Securing the Proper Position of the Key Scan Assembly 14
G ] Setting the proper Key Scan Assembly Height 15
H ] Dressing the Key Scan Assembly Cables
16
I ] Preparing the Keys
J ] Soft Pedal Circuit Board Installation [Grand & Upright] 17
K ] Mounting the TUSB Interface 18
L ] Sustain Pedal Circuit Board Installation [Grand & Upright] 19
M ] Final Assembly 20
Keyboard Setup (Calibration)
Pedal Setup
Component Placement [Grand & Upright] 22
Operating Modes / Standard Version and Version 45 (Used with QRS Sound Module 23
TUSB Interface Rear Panel Connections 24
TUSB Interface Front Panel 25
Connection Diagrams [Grand & Upright] 26
Troubleshooting 27
Warranty 28-29
21