Warnings
FCC INFORMATION
1.IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the Installation Manual, meets FCC, CE, Chinese CE and Austra-
lia CE requirements. Modifications not expressly approved by QRS Music Technologies, Inc. may void your
authority, granted by the FCC, to use this product.
2.
IMPORTANT: When connecting this product to accessories and/or another product use only high quality
shielded cables. Cables supplied with this product MUST be used. Follow all installation instructions. Fail-
ure to follow instructions could void your FCC authorization to use this product in the United States of
America.
3.
NOTE: This product has been designed to comply with the requirements listed in the FCC Regulations, Part
15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assur-
ance that your use of this product in a residential environment will not result in harmful interference with
other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used
according to the instructions found in the Installation Manual, may cause interference harmful to the op-
eration of other electronic devices. Compliance with FCC regulations does not guarantee that interference
will not occur in all installations. If this product is found to be the source of interference, which can be de-
termined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the fol-
lowing measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different circuits (circuit breaker or fuse) or install AC line filters.
If these corrective measures do not produce satisfactory results, please contact the local authorized dis-
tributor, or contact QRS Music Technologies, Inc. 269 Quaker Drive Seneca, PA 16346.
Precautions!
If this is your first PNOscan II installation it is highly recommended that you read through the manual
before beginning the installation.
If this PNOscan II system will only be used with a computer you will NOT need a power adapter. Power to
the system is supplied by the computer. You WILL need a cable to connect PNOscan II to the computer.
See the Accessories list on page 3.
If you’re installing this kit into an upright piano, check that you have upright conversion parts.
Look for the * (QTY column) in the parts list on page 6.
It’s very important that the bottoms of the keys are light in color with no paint stains. And, that the sides
of the keys, in the area of the sensors, are colored black. See “Preparing the Keys”, on page 16.
The installation is NOT complete, and the system will not work correctly, until the Keyboard and Pedal
Setup procedures are performed.
See page 21 for details.
If installing a Version 45 TUSB for use with the QRS Sound Module...
DO NOT CONNECT A POWER ADAPTER TO THE POWER INPUT OF THE TUSB. Power to the TUSB is supplied
by the QRS Sound Module via the Serial I/O port. See page 25.
2
