P N O s c a n
P N O s c a n
P N O s c a n
I I
I I
I I
I n s t a l l a t i o n M a n u a l
I n s t a l l a t i o n M a n u a l
I n s t a l l a t i o n M a n u a l
Manual Rev. 1.18
25
QRS Music Technologies, Inc. / Technical Support - 800-247-6557 / www.qrsmusic.com
H
F
G
I
J
K
L
Connection to the soft pedal board is made here. This accepts the 10-Pin Flex Cable.
Primary Port
F
This port accepts a 6-Pin Flex Cable from the Key Scan Assembly. This port is normally not connected,
although it can be used along with the Primary Port if desired. When only the Primary Port is used then the
Key Scan Assembly gets connected to the Soft Pedal Board.
Alt Key Port
G
Standard MIDI output connection. Connects PNOscan
II
to sound modules, QRS Pianomation or other MIDI
device.
MIDI OUT
H
Standard MIDI input connection. Normally not connected. Used in more complex setups when
communication to diagnostic programs such as the MIDI9 alignment program is needed.
MIDI IN
I
Connect a host computer to this port for convenient use of the PNOscan
II
system and computer software.
USB 2.0 compliant
USB
J
Used with PNOscan Version 45, modified for use with the QRS sound Module.
The QRS Sound Module provides power to the TUSB via this port. See the PNOscan V45 User Guide.
Serial
I
/O
K
Connect the AC wall power adapter here. Use only the supplied adapter. 5VDC 1.0A
With V45 TUSB units, modified for the QRS Sound Module, DO NOT CONNECT TO ANY ADAPTER!
The TUSB unit receives its power from the QRS Sound Module via the Serial I/O port.
5 Volt Input
L
TUSB Interface Rear Panel Connections
On Version 45 TUSB units,
modified for use with the
QRS Sound Module,
DO NOT CONNECT
ANYTHING to the 5VDC
socket. Power to the TUSB
is supplied from the
module via the Serial I/O.
