background image

29 

 

Exclusions

  

There is no express warranty on the Product and this warranty is void if:  

1) You did not purchase this Product from an authorized Pianomation reseller 
2) This Product has been serviced, modified or tampered with by anyone other than an QRS Authorized Service 

Representative  

3) The name, trademark or serial number has been modified, defaced or removed from the product,  
4) This Product has been damaged as a result of abuse,  abnormal force or strain, failure to reasonably maintain 

and protect, modification, accident or  exposure to extreme  temperature or  humidity,  

5) Parts, supplies or other accessories which have not been approved by QRS have been used with this Product,  
6) Radio frequency interference is generated by uncertified and/or illegal equipment,  
7) This Product has been moved or delivered  without reasonable  preparation and  packaging or  
8) QRS reasonably determines, after inspection that there has been modification of this Product which adversely 

affects the reliability of the product or component. 

 

Owner’s Responsibility 

In order to have rights under this warranty, you have the following responsibilities: 

1) Retain your proof of purchase and purchase date and  send in your Warranty Registration Card  
2) Notify QRS or any authorized dealer of any warranty claim  within ten (10) days after discovery and provide a 

detailed explanation of the problem. 

 

General 

If any provision herein shall be unlawful, void or for any reason unenforceable, then that provision shall be deemed 
severable from this warranty certificate and shall not affect the validity of and enforceability of the remaining 
provisions. 
 
QRS reserves the right to make changes in design and/or improvements to its products without any obligation to 
retrofit products previously manufactured. 
 

INSTRUCTIONS FOR OBTAINING WARRANTY SERVICE 
 

 1) If you cannot provide proof of purchase, contact QRS at 800-247-6557 and we will attempt to determine the 

date on which your dealer purchased the Product and assist you in determining the Shorter Warranty Period. 
For warranty service, contact the dealer from whom you purchased the product, or your nearest dealer. 

2) If no dealer is near you, contact QRS by phone at 800-247-6557. 
3) Do not ship the product without prior written Return Authorization from QRS. Do not attempt to repair or 

disassemble the product yourself. 

4) Please record your model number and serial number and your date of purchase below for your records.  Keep 

this information with your proof of purchase in case your product requires service.  Do not dispose of the 
warranty after it expires.  In the event your product ever requires service, these instructions should be helpful 
in enabling you to obtain proper service. 

 
Product Model #______________________ 
 
 
Product Serial #_______________________ 
 
 
Date of purchase_______________ 

Содержание PNOscan II

































Отзывы: