QRS Opti 24-hour ABPM, Руководство пользователя

Страница: 8 / 15

Setting Up the System
Overview of the ABPM System
The basic components of the Opti ABPM system are:
• Opti ABP monitor with 4’ patient hose assembly
• OptiFit ™ cuffs (Adult and Adult Plus)
• Pouch
• Belt
•
Opti User’s Guide
• Opti-Insight User’s Guide
• Opti-Insight CD
• USB cable
See the Product and Accessories page for contents.
Hardware Requirements
• Pentium based or equivalent PC-compatible computer with CD drive
• SVGA or compatible display adapter and monitor (1024 x 768 resolution
recommended)
• One available USB or serial port
• 32 MB RAM and minimum 20 MB HDD recommended
Software Requirements
Microsoft Windows
®
version 98 or later, excluding Windows ME
Microsoft Internet Explorer
®
3 or later with Microsoft HTML Help.
Powering the Opti for use
Install 2 AA batteries in the bay located at the back of the monitor. The label in the
bay shows the orientation in which the batteries should be placed. When batteries are
properly loaded, the monitor’s display will show the following:
1. Incrementing dashes for two seconds
2. Software and safety version of the monitor
3. Battery voltage for two seconds
4. Three quick beeps
5. The number of BP readings in memory with flashing printer for three seconds
6. One long beep
7. Time flashing for twenty seconds
The monitor is now ready to be used.
Opti at a Glance
LCD & Key Diagram
START/STOP Button Functions Explained
Start/Stop
Button
• TO POWER ON: When the monitor is off, press the Start/Stop
button.
• TO POWER OFF: When the monitor is on but not taking a
reading, press and hold the Start/Stop button until you hear five
quick beeps, then release.
• TO ABORT A MEASUREMENT: When the monitor is taking a
reading and the cuff pressure is displayed, press the Start/Stop
button.
• TO START THE PROGRAMMED ABP STUDY: When the time is
flashing, press the Start/Stop button.
• TO START A SINGLE BP READING: When the time is displayed,
press the Start/Stop button.
Time
Indicates current time; when flashing, the monitor will turn off in the
next 20 seconds unless an ABP study is started.
Pressure
Indicates the pressure of the cuff in mmHg during a BP
reading.
BP
Reading
Immediately after a BP reading, the display shows the results of the
reading if enabled. Blood pressure in mmHg followed by heart rate
in beats per minute.
Battery Indicates low battery voltage; BATTERIES NEED TO BE REPLACED.
Systolic/Diastolic
START/STOP
15 14