19
Chapter 3.
Start to Use the VioStor
When you have installed the VioStor and other hardware, and connected it to the network,
you can use the browser in your PC to connect to the VioStor. It is recommended to use
Microsoft Internet Explorer 6.0 for browsing.
Important Notice:
Before you start to use the VioStor, you must install the hard disks in the VioStor, finish disk
volume configuration and format the hard disk(s). Otherwise, the system may not
function properly.
3.1
Connect to the VioStor
Follow the steps below to connect to the VioStor monitoring page:
1.
Open an IE browser and enter the IP address of the VioStor or run Finder. When the
following screen is shown, double click the name of the VioStor.
Double click
VioStor name to
login the server
