QNAP VioStor-2008, Руководство пользователя

Страница: 64 / 115

5.4.4 UPS
If there is UPS, you can enable UPS support. If the AC power is abnormal, the
system will shut down according to the settings. If the time has not reached and the
power of the UPS is not sufficient, the system will shut down immediately to protect
the server.
* It is recommended to connect UPS to one of the USB ports at the back of server.
z
Enable UPS Support
Check this option to enable UPS support. You can configure the time when the
system should shut down when AC power status is abnormal. In general, UPS
can supply power for 5-10 minutes when AC power is down depending on the
maximum load and number of connected devices of the UPS.
z
UPS Model
Select the UPS model on the list. If your UPS is not available on the list, please
contact the distributor or the technical support of QNAP.
z
IP Address of UPS
If you select “APC UPS with SNMP Management”, please enter the IP address of
the UPS.
Note: It is recommended to use APC Smart-UPS 700+ APC Network
Management Card.
64