QNAP VioStor-2008, Руководство пользователя

Страница: 54 / 115

z
Network Transfer Rate
You can select auto-negotiation (default), 1000 Mbps, or 100 Mbps. It is
recommended to use the default setting that the server will determine network
speed automatically.
z
Obtain IP address settings automatically via DHCP
If your network supports DHCP, VioStor will use DHCP protocol to retrieve the
IP address and related information automatically.
z
Use static IP address
To use fixed IP address for network connection, enter fixed IP address, subnet
mask, and default gateway.
z
Primary DNS Server
Enter the IP address of primary DNS server that provides DNS service for
VioStor in external network.
z
Secondary DNS Server
Enter the IP address of secondary DNS server that provides DNS service for
VioStor in external network.
Enable DHCP Server
If no DHCP is available in the LAN where the VioStor locates, you can enable this
function to enable the VioStor as a DHCP server and allocate dynamic IP address to
DHCP clients in LAN.
You can set the range of IP addresses allocated by DHCP server and the lease time.
Lease time refers to time that IP address is leased to the clients by DHCP server.
When the time expires, the client has to acquire an IP address again.
Note: If there is an existing DHCP server in your LAN, do not enable this function.
Otherwise, there will be IP address allocation and network access errors.
54