QNAP TS-h1886XU-RP-R2 Скачать руководство пользователя страница 42

Страница: 42 / 62

LEDs

LEDs indicate the system status and related information when the device is powered on. The following

LED information applies only when the drive is correctly installed and when the device is connected to the

network or to a host.

For details on the location of the LEDs, see

Components

LED

Status

Description

System Status

Flashes green and

red alternately

every 0.5 seconds

• The drive is being formatted.

• The device is being initialized.

• The operating system is being updated.

• RAID rebuilding is in progress.

• Online RAID Capacity Expansion is in progress.

Important

When updating the firmware, do not remove the

power cord or USB cable, and do not force-exit the

application.

Red

• The drive is invalid.

• The disk volume has reached its full capacity.

• The system fan is not functioning.

• An error occurred when accessing (read/write) the data.

• A bad sector is detected on the hard drive.

• The device is in degraded read-only mode (two member

drives failed in RAID 5 or RAID 6 but the data can still be

read).

• A hardware self-test error occurred.

Flashes red every

0.5 seconds

The device is in degraded mode (one member drive failed in RAID

1, RAID 5, or RAID 6).

Flashes red once

The device has received a command from the remote control.

Green

The device is ready.

Flashes green every

0.5 seconds

• The device is not configured.

• A drive is not formatted.

Flashes orange

The device is in sleep mode.

Off

• All drives are in standby mode.

• The device is powered off.

TS-h1886XU-RP User Guide

Basic Operations

Содержание TS-h1886XU-RP-R2































































Результаты поиска

Содержание TS-h1886XU-RP-R2

Отзывы:

Похожие инструкции для TS-h1886XU-RP-R2

Бренды по названию

Популярные бренды

QNAP TS-h1886XU-RP-R2, Руководство пользователя

Результаты поиска

Содержание TS-h1886XU-RP-R2

Отзывы:

Похожие инструкции для TS-h1886XU-RP-R2

Бренды по названию

Популярные бренды