background image

If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect

according to their terms, reviewing courts shall apply local law that most closely approximates an

absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of

liability accompanies a copy of the Program in return for a fee.

END OF TERMS AND CONDITIONS

CE Notice

 This QNAP NAS complies with CE Compliance Class A.

FCC Notice

FCC Class A Notice

 This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired

operation.

Note

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses, and can radiate radio

frequency energy, and if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference, in which case the user will be

required to correct the interference at his own expense.

Important

Any modifications made to this device that are not approved by QNAP Systems, Inc. may

void the authority granted to the user by the FCC to operate this equipment.

TS-h1886XU-RP User Guide

Notices   

59

Содержание TS-h1886XU-RP-R2































































Отзывы: