QNAP TS-h1886XU-RP-R2 Скачать руководство пользователя страница 44

Страница: 44 / 62

LED

Status

Description

Redundant power

supply

Green

The power supply unit is connected to a power source, and the

device is powered on.

Flashes green

The power supply unit is connected to a power source, and the

device is powered off.

Orange

• The power supply unit is disconnected from a power source,

but a parallel power supply unit is connected to a power

source.

• The power supply unit has shut down due to one of the

following:

• The power supply unit failed.

• OCP was activated.

• OVP was activated.

• The fan failed.

Flashes orange

• The temperature is too high.

• The power is too strong.

• The current is too high.

• The fan is too slow.

Orange for a few

seconds and then

off

The power supply unit has been disconnected from a power

source, while no parallel power supply unit is connected to a

power source.

Off

All power supply units are disconnected from a power source.

Audio Alert

Duration

Frequency

Description

Short beep (0.5 seconds) 1

• The NAS is starting up.

• When the reset button is pressed for 3 seconds,

the NAS resets configurations.

• When the reset button is pressed for 10 seconds,

the NAS resets configurations and reboots.

• The operating system was updated.

Cannot detect installed disk.

TS-h1886XU-RP User Guide

Basic Operations

Содержание TS-h1886XU-RP-R2































































Результаты поиска

Содержание TS-h1886XU-RP-R2

Отзывы:

Похожие инструкции для TS-h1886XU-RP-R2

Бренды по названию

Популярные бренды

QNAP TS-h1886XU-RP-R2, Руководство пользователя

Результаты поиска

Содержание TS-h1886XU-RP-R2

Отзывы:

Похожие инструкции для TS-h1886XU-RP-R2

Бренды по названию

Популярные бренды