manualshive.com logo in svg

QNAP TS-h1886XU-RP-R2, Руководство пользователя, Страница: 43 / 62

Поделиться
Скачать
QNAP TS-h1886XU-RP-R2 Скачать руководство пользователя страница 43

LED

Status

Description

Drive

Flashes red

The data is being accessed and a read/write error occurs during

the process.

Red

A drive read/write error occurred.

Flashes green

Data is being accessed.

Green

The drive is ready.

Off

No drive was detected.

Drive Status

Green

The drive is ready.

Red

A drive read/write error occurred.

Flashes red 5 times

per second

The drive is being located in the operating system.

Off

No drive was detected.

Drive activity

Green

The drive is ready.

Flashes green

The drive is being accessed.

Off

No drive was detected.

Expansion

Orange

An expansion unit is connected.

Off

No JBOD expansion unit has been detected.

10 Gigabit

Ethernet (SFP+)

link

Green

The network connection is operating at 10 Gbps

Off

There is no network connection.

10 Gigabit

Ethernet (SFP+)

activity

Orange

A network connection has been established.

Flashes orange

Data is being transmitted.

Off

There is no network connection.

2.5 Gigabit

Ethernet speed

Green

The network connection is operating at 2.5 Gbps.

Orange

The network connection is operating at less than 2.5 Gbps.

Off

There is no network connection.

2.5 Gigabit

Ethernet activity

Green

A network connection has been established.

Flashes green

The device is being accessed from the network.

Off

There is no network connection.

TS-h1886XU-RP User Guide

Basic Operations   

42

Содержание TS-h1886XU-RP-R2































































Отзывы:

Нет отзывов