QNAP TS-1079 Pro, Руководство пользователя программного обеспечения

Страница: 161 / 321

161
6.2 FTP
Go to "Control Panel" > "Network Services" > "FTP" to Configure the FTP server.
FT P Se rvice
When you turn on FTP service, you can specify the port number and the maximum
number of users that are allowed to connect to the NAS by FTP at the same time. To
use the FTP service of the NAS, enable this function. Open an IE browser and enter
ftp://NAS IP. Enter the username and the password to login the FTP service.
Protoc ol Ty pe : Select to use standard FTP connection or SSL/TLS encrypted FTP.
Select the correct protocol type in your client FTP software to ensure successful
connection.
Unic ode Support: Turn on or off the Unicode support. The default setting is No. If
your FTP client does not support Unicode, you are recommended to turn off this
option and select the language you specify in "General Settings" > "Codepage" so
that the file and folder names can be correctly shown. If your FTP client supports
Unicode, enable Unicode support for both your client and the NAS.
Anony m ous Login: You can turn on this option to allow anonymous access to the
NAS by FTP. The users can connect to the files and folders which are open for
public access. If this option is turned off, the users must enter an authorized
username and password to connect to the server.
C onne c tion: Enter the maximum number of all FTP connections allowed for the NAS
and a single account and check "Enable FTP transfer limitation" to specify the
maximum upload and download rate.