QNAP QHora-301W Скачать руководство пользователя

Страница: 50 / 68

Setting

Description

Client IP pool

Specify a range of IP addresses available to connected VPN clients.

Important

By default, this server reserves the use of IP addresses

between 198.18.4.2 and 198.18.4.254.

If another connection is configured to use this range,

an IP conflict error will occur. Before adding this

server, ensure a VPN client isn't configured to use this

range as well.

Service Port

Select from the following options:

• TCP

• UDP

Note

Default port number: 1194

Encryption

Select from the following encryption methods:

• Medium (AES 128-bit)

• High (AES 256-bit)

DNS

Specify a DNS server for the OpenVPN server.

Note

The DNS server limitation is 1 by default.

6. Enable Use this connection as a default gateway for remote devices.

Note

Enable to allow the default network gateway to be redirected across the OpenVPN server. All

non-local traffic from the client is transferred through the VPN server.

7. Enable Enable compressed VPN link.

Note

This setting compresses data before transferring it over the VPN. This will increase data

transfer speeds, but requires additional CPU resources.

8. Click Apply.

QuRouter saves the OpenVPN server settings.

9. Optional: Click

to download configuration files to set up an OpenVPN server manually.

Adding a VPN User

1. Open QuRouter.

2. Go to QVPN Servers > QVPN User Management .

3. Click Add.

4. Specify the username and password.

QHora-301W User Guide

Network Settings

Содержание QHora-301W





































































Результаты поиска

Содержание QHora-301W

Отзывы:

Похожие инструкции для QHora-301W

Бренды по названию

Популярные бренды

QNAP QHora-301W, Руководство пользователя

Результаты поиска

Содержание QHora-301W

Отзывы:

Похожие инструкции для QHora-301W

Бренды по названию

Популярные бренды