QMS 3225, Руководство по установке лоткового модуля

Страница: 6 / 24

QMS 3825/3225 Large-Large-Capacity Input Tray Option 2
Introduction
Large-Large-Capacity Input Tray Indicators
The Large-Large-Capacity Input Tray (LLCIT) has step-by-step
instruction illustrations, a button to lower the interior tray, and an error
light to alert you to any condition that requires your attention.
Selecting a Paper Size
Changing the paper size for the LLCIT requires special care to avoid
damaging electrical connections. We recommend that you
✓
Evaluate your printing needs and choose one size for the
LLCIT
✓
Have the service representative set the LLCIT for that size
during installation
✓
Do not alter the size setting
» Note: Only a qualified QMS service technician should change the LLCIT size
settings. Service instructions for changing the paper size begin on page 4. If
you damage the printer or the Large-Large-Capacity Input Tray while
changing the size settings, it will affect your warranty.
Instruction Illustrations Once you know how to load paper from
reading this manual, the step-by-step
illustrations will help you remember in what
order to perform the various steps.
Tray Down Button Press this button to lower the paper tray inside
the LLCIT. The tray must be at the bottom
position before you can load paper.
If the printer runs out of paper, the tray lowers
automatically.
This button lights when the tray is in motion.
Error Light This red light comes on if paper is loaded
incorrectly, if the paper size does not match the
tray’s setting, or if the LLCIT door is open.