QMS 3225, Руководство по установке лоткового модуля

Страница: 19 / 24

Changing the
LLCIT Paper Size
15 QMS 3825/3225 Large-Large-Capacity Input Tray Option
b Remove the
three black
screws from
the silver top
section of the
side rail.
c Lift the end of
the size
indicator bar at
top rear.
d Remove the
silver section
of the side rail.
e Disconnect the keyring-type fastener at the bottom of the
chain guide.
f Tilt and
remove the
side rail.
» Note: Store the
2 rail sections, 2
thumb screws,
and 3 black
screws in the
printer’s storage
cabinet in case
you change the
paper size again
later.
g Reattach the chain guide.
h Skip to “Reassemble the LLCIT” on page 17.