QMS 2025, Руководство администратора

Страница: 82 / 158

PCL 5
QMS 3825/3225/2025 System Administrator’s Guide 5-6
Line Termination
Line Termination sets the printer response to a carriage return or line
feed character while in PCL 5 emulation. The choices are
CR = CR, LF = LF
CR = CR + LF, LF = LF
CR = CR, LF = CR + LF
CR or LF = CR + LF
CR stands for carriage return. LF stands for line feed. The default is
CR=CR, LF=LF.
Point Size X100
This option sets the point size in hundredths for scalable default fonts
(those listed with an asterisk [*] in the Default Font options). For
example, a 24-point default size is selected by entering 2400. Point
sizes are selectable in increments of 25. The minimum value is 25
(0.25 points), the maximum is 99975 (999.75 points), and the default
is 1200 (12 points).
Retain Temporary
Retain Temporary allows you to choose whether to retain temporary
PCL 5 macros and fonts at the end of each print job. The options are
Off (temporary fonts and macros are deleted at the end of each job),
On (save the temporary macros and fonts), and On Compatibility
(retain the entire state of PCL as well as the temporary macros, fonts,
and patterns from previous PCL jobs). The default is Off.
Scalable Fonts
Scalable fonts allows you to specify whether to scale PCL 5 fonts.
The options are Enable and Disable with the default being Enable.
Disabling Scalable fonts essentially recreates PCL 4 and allows you
to prevent PCL4 documents from inadvertently selecting PCL 5 scal-
able fonts.