QMS 2025, Руководство администратора

Страница: 28 / 158

QMS 3825/3225/2025 System Administrator’s Guide 1-18
Upgrading Print
System Software
11 Press the Menu key. The message window displays the fol-
lowing message:
QMS SOFTLOAD x.x
INSTALL TO DISK
12 Press the Next key until the message window displays the
following message:
QMS SOFTLOAD x.x
BOOT SYSTEM
13 Press the Select key to enter the Boot System submenu. The
following message appears in the message window:
BOOT SYSTEM
HARD DISK
14 Press the Select key and the following message appears:
BOOT SYSTEM
HARD DISK 6
15 Hard disk 6 is the internal hard disk. If you have any external
hard disks connected, you can cycle through them by press-
ing the Next key. For this example we are using the internal
hard disk. Press the Select key. The system begins loading,
and the following message displays:
BOOT SYSTEM
LOADING x.x
16 At this point, DO NOT TOUCH ANY KEYS until the system
has completed loading. The system may go through many
cycles of rebooting, which may take several minutes. When
the system rebooting is complete, the message window dis-
plays:
IDLE
» Note: If you do touch some keys during this step, you must go
back to step 12 and start from there again.