QMS 2025, Руководство администратора

Страница: 73 / 158

Parallel
Communication
4-13 Administration/Communications Submenu
can be used at a time. The default is QMS EOD. Refer to QMS Crown
Network Notes for more information on End Job Mode.
Def Job Prio
The Def Job Prio (Default Job Priority) option determines which jobs
are printed first, according to the interface from which they are
received, when jobs are received simultaneously. The range is from
001 to 100. The default is 001, which is the highest priority.
PS Protocol
This option sets the binary communications protocol (BCP) for com-
municating over a serial, parallel, or optional network interface to a
PostScript printer. Binary communications protocol allows any 8-bit
binary value (0-255) to be treated as data, while allowing a few of the
values to function as special control characters. When communicat-
ing 8-bit binary data in Binary or Binary Fixed mode, the printer uses
the quoting mechanism of the BCP to distinguish between the special
control characters and print job binary data.
To differentiate data from the special control characters, any data that
is the same as one of the following special control characters must be
quoted:
ASCII
Keyboard
ASCII
Name
ASCII
Hex Value
Control
Function
^A SOH 0x01 Quote data character
^C ETX 0x03 Abort job and flush to end of file
^D EOT 0x04 End-of-file marker
^E ENQ 0x05 (Reserved for future use)
^Q DC1 0x11 XON in XON/XOFF flow control
^S DC3 0x13 XOFF in XON/XOFF flow control
^T DC4 0x14 Job status request
^\ FS 0x1C (Reserved for future use)