QMS 1060E, Операция

Страница: 38 / 116

Introduction
QMS 1060E Print System Operation 3-2
Introduction
This chapter describes how to chain paper cassettes, collate output,
print a status page, cancel a print job, and end a print job.
Chaining Cassettes
The QMS 1060E Print System comes standard with one 500-sheet
cassette: letter/A4. You can insert only one cassette at a time in the
printer unless you purchase the optional feeder and cassette that
increases paper feed capacity to 1150 sheets, including the 150-
sheet multipurpose tray.
You may choose to have the printer automatically draw from another
cassette when the default cassette is empty. There are three ways to
do this:
n
Use your application if it includes a procedure for using a dual-
cassette printer. Check your documentation.
n
Use the PS Executive Series Utilities to configure the printer's
paper source.
n
Configure your printer for paper cassette chaining through the printer’s
control panel. The following section contains more information.
How to Chain Cassettes
The Chain Inputbins option in the Operator Control menu allows you
to “chain” inputbins (tray and cassettes) so that when the first inputbin
empties, the printer automatically draws paper from another inputbin
with the same size paper.