QMS 1060E, Операция

Страница: 80 / 116

Output
Problems
QMS 1060E Print System Operation 6-20
NetWare Banner Page Job Does Not Print
If you experience problems when printing a job using NetWare with a
banner page, change the Administration/Communications/Network 2/
CrownNet/PS Protocol value to QBinary or QBinary Fixed.
Not All Pages Print
n
Check the cable connecting the printer and the host. You could
have the wrong kind of cable, or your printer may not be config-
ured for the correct cable and port.
n
Make sure no one pressed the Cancel key while your job was
printing.
n
Check the control panel message window to see if the cassette or
multipurpose tray is out of paper.
n
Check to see if a jam has occurred during the print job.
Orientation Problem
If you have manually set the orientation (landscape or portrait) through
the control panel and your image doesn’t print correctly, you may be
experiencing an orientation problem. The preferred method to set
orientation is through your application.
PostScript Error with Error Handler Enabled
n
If you receive a PostScript error when printing a file that previ-
ously printed correctly on another PostScript printer, check the
“Other Problems” section that follows for a solution. If no solution
is found, then call your QMS vendor for additional error informa-
tion.
n
If you receive a PostScript error when printing a new file from a
new application, check the “Other Problems” section that follows
for a solution. If no solution is found, see the
PostScript Lan-
guage Reference Manual (Adobe Systems, Inc., Reading, MA:
Addison-Wesley, 1990, ISBN 0-201-18127-4), or call your QMS
vendor for additional error information.