background image

Cancelling/

Ending Print

Jobs

QMS 1060E Print System Operation

3-8

Cancelling a Print Job

Press the control panel keys in the order shown in the following 
instructions to cancel a print job.

Caution

: Keep in mind that

all

jobs with a printing, interpreting, or 

terminating status are cancelled.

Ending a Print Job

»

Note: 

This procedure does not end print jobs that are still receiving 

data. Its only purpose is to provide an end-of-job indicator for a print 
job that does not have one. You can identify an end-of-job indicator in 
the Administration/Communications/Parallel and Administration/
Communications/Serial menu. (See chapter 4, “Printer 
Configuration,” in the Reference for more information). Also see 
chapter 5, “Additional Technical Information,” in the Reference for a 
complete discussion of End Job Mode.

Press 
this 
key...

to...

For 1.5 seconds, the 
message window 
reads...

and then it 
reads...

Cancel Access the 

CANCELLING JOB

 

menu, which 
prompts you for 
confirmation that you 
want to cancel the 
print job.

CANCELLING JOB?

YES

Cancel 
or 
Select

Select Yes.

YES

Cancel all jobs with a 
printing, interpreting, 
spooled, or 
terminating status. 
The 

CANCELLING 

JOB

 message 

displays until the print 
jobs are completely 
removed.

CANCELLING JOB

Содержание 1060E





















































































































Отзывы: